MAC Minarelli 125cc shifter engine

Daniel Bergstrand · Joined: 18 May 2010 Posts: 2

Hi,

FYI: Im new to this forum and to karting. Hopefully, this forum is the correct one to make my post in.

By chance i came across a Dino 592 chassi combined with a 125cc MAC Minarelli engine. The Minarelli is a 125 cc 2-stroker, liquid cooled, 6-gear tranny engine. As good as this may sound (?) I'm also in need of some spare parts... and here comes the tricky part: I can't find any!

And worse, I know nothing about these engines, and therefore It would be very nice having a blueprint available. But this is probably even more tricky to get a hold of then the spare parts.

Any how, if any of you in this brilliant forum can tell me where I can find spare parts and blueprints for this engine, It would really make my day Smile

And also: Everything there is to know about the chassi and engine is much appreciated!

Best regards,
Daniel (situated in Sweden)

Cory Milne · Joined: 10 Aug 2009 Posts: 99

i would check the web sites
mac m. http://www.macminarelli.com/
dino
http://www.dino.dk/webshop/product_info.php/cPath/31_62/products_id/61175

ric mcdade · Joined: 13 Feb 2006 Posts: 151

Brian Wilhelm on here is the sharpest Mac Minarelli guy in the country. He did most of the R&D work on them.

Dan Davis · Posted: Sat May 22, 2010 7:17 am Post subject:

The only person I know of still working with Mac Minarelli engines is Rick Beaver who lives in Raytown, Missouri. Not sure about any documentation that might be available and I do know that the parts are in very short supply. You should be able to PM Rick Beaver from this site to try to get a hold of him. I do not currently have his contact info.

Rick Beaver · Posted: Mon May 31, 2010 8:12 am Post subject:

Dear Sior,there are'nt very many parts left here in USA anymore,where do you live?If you are in europe ther are still some sources ,I've very good luck with the engine so far. good luck in your search Rolling Eyes

Daniel Bergstrand · Joined: 18 May 2010 Posts: 2

Thank you all for trying your best to solve my problem. And thank you Rick for that last one. As It happens, I've found an old agent here in Sweden whom I, by chance really, came in contact with. And he's still holding some spare parts in stock.

Case closed...for now Wink

Take care,

Daniel

Gary Sapsed · Joined: 02 Dec 2012 Posts: 4

Hi,
I have one working Mac engine for sale, also one for spares / repair.
Thanks

Riley Will · Posted: Fri Feb 01, 2013 5:10 pm Post subject:

Specifically, what parts do you need. Most things are quite interchangeable between brands. Here to help and advise if you like.
_________________
Riley Will
BRC Engineering
rwill@brceng.com
(403) 216-0630 wk.
www.brceng.com

Rick Beaver · Posted: Sat Feb 02, 2013 8:04 am Post subject:

Dear Sir,what help you may need as far as tuning or parts help let me know .I'll try my best to help Smile