2001 Reed Blocks and Inlet Rubbers

gavin bennett · Posted: Wed Nov 18, 2009 1:11 pm Post subject:

Hi Ted i have race as a team mate of james why is he over there now if so say hi from me and why dont every body just chill out on here and grab a few beers life would be so much beter
_________________
2007/2009/2010 European champion CIK Div1
2011 superstars of Superkarts champion
2010 British kart GP winner Div1
2010 ISS Champion Div1
2007 USKGP champion F/E
2005/2007/2008/2011 UK cup winner MSA\DIV1
2005 MSA British Champion

Ian Harrison · Posted: Wed Nov 18, 2009 1:45 pm Post subject:

Hi Graham

No I'm afraid that I'm not that Ian Harrison, although I do know of him.

I thought you might be the Graham Wilcock who went to school with my brother, Neil, but that Graham didn't have a brother, so I guess that's not you either.

Ted - James Pickford from Congleton - you mean the one who says you still owe him a tenner??? - - - - - - - - - - no I don't know him either Laughing

Ah well that was all a right old waste of time.

B-----dy hell, Gavin's here now what with Eddie and Mark Vaughan as well the place is littered with Pom's.

Gavins quite right, let's put a stop to all this bitchiness. Chris you should be ashamed of yourself.

I'm off to my new thread, then a fish supper from the Chip Shop and a couple of pints of Draught Guiness (brewed in Dublin did you know?), served at 2 degrees C Wink

Peace and Love

Ian Very Happy

_________________
Ian Harrison
Viper Racing UK
www.viper-racinguk.co.uk
sales@viper-racinguk.co.uk
+44 7984 225 564
+44 161 343 2009
Championship winning Superkart race team 1997-2012

ted dale · Joined: 25 Oct 2004 Posts: 611

Gavin .. I have known James since he was a baby.And he still lives in macelsfeild. Me and his dad Keith are best mates. James used to come to all the races when his dad sponserd Alan Carter When Alen raced for Honda great britain on a RS250

Ian sorry we stole your forum again
But whow cares its all about slow cr250"s anyway
_________________
Anderson gas gas

Chris Hegar · Posted: Wed Nov 18, 2009 2:29 pm Post subject:

I'm sorry lady's!

It's raining and I'm bored and no one around here will talk to me except for these many, many voices in my head.
_________________
www.Hegar4.com

Roger Lockey · Posted: Wed Nov 18, 2009 4:18 pm Post subject: Ian

I had a quick look at your hand cut intake manifold. I can probably help you out with it. I've modeled and CNC cut one for my own 250 single. Below are some jepegs of the CAD model.

Here are 2 pictures of the machined manifold.

Here are 2 photos of the assembled manifold, intake rubber and reed cage.

I'd be happy to talk to you about modeling and creating cutter path for your Honda setup.

You can see some of the other items I've cut at http://s799.photobucket.com/albums/yy280/karter59/

Roger Lockey

Mark Vaughan · Posted: Wed Nov 18, 2009 4:32 pm Post subject:

now now ladies handbags down Laughing

lets get back to the point in question------what was it ?? ah yes Ian's inlet holes !!!
_________________
Mark Vaughan

Viper Racing-UK 250 Team Driver
backed by Proclean racing .com

Ian Harrison · Posted: Wed Nov 18, 2009 4:35 pm Post subject:

Hi Roger

Nice work

Thanks for the offer. I'll drop you a PM if I can use your help in the future. That old one is all finished now, however we are working on new stuff all the time

Many thanks for your offer

Best Regards

Ian
_________________
Ian Harrison
Viper Racing UK
www.viper-racinguk.co.uk
sales@viper-racinguk.co.uk
+44 7984 225 564
+44 161 343 2009
Championship winning Superkart race team 1997-2012

Stephen Gleason · Joined: 20 Nov 2009 Posts: 43

I s there a part # for the straight inlet rubber???? Is it a HONDA part?

Ian Harrison · Posted: Wed Dec 02, 2009 5:30 pm Post subject:

Hi Stephen

Just clarify exactly which straight rubber it is you mean.

There is the Honda ATV rubber that most use on the '01 motor.

There is the straight RS rubber which is an HRC part.

There is the straight rubber with the 2 bolt flange produced by various manufacturers,

I'm at home now, but if you clarify which, I will post detail tomorrow from work.

Best Regards

Ian Very Happy

_________________
Ian Harrison
Viper Racing UK
www.viper-racinguk.co.uk
sales@viper-racinguk.co.uk
+44 7984 225 564
+44 161 343 2009
Championship winning Superkart race team 1997-2012

Stephen Gleason · Joined: 20 Nov 2009 Posts: 43

I am building a CR 250 engine for dirt oval racing and I am looking to have the carb straight back off the engine and was wondering my options

thanks
stephen

Ian Harrison · Posted: Fri Dec 04, 2009 6:45 pm Post subject:

Hi Stephen

Is the motor a barrel or crankcase induction?

Best Regards

Ian Very Happy

_________________
Ian Harrison
Viper Racing UK
www.viper-racinguk.co.uk
sales@viper-racinguk.co.uk
+44 7984 225 564
+44 161 343 2009
Championship winning Superkart race team 1997-2012

Stephen Gleason · Joined: 20 Nov 2009 Posts: 43

it is on the cylinder I have a 96 and 99 cylinder

Ian Harrison · Posted: Sat Dec 05, 2009 1:21 am Post subject:

Hi Stephen

The straight ATV rubber, which is what is being currently used by most is # 16221 430 000

If you are following the thread, you will see that we are in the middle of testing various configurations for the 2001 "type" motor.

Folow the topic and you should have the definitive answer soon Cool

Best Regards

Ian Very Happy

_________________
Ian Harrison
Viper Racing UK
www.viper-racinguk.co.uk
sales@viper-racinguk.co.uk
+44 7984 225 564
+44 161 343 2009
Championship winning Superkart race team 1997-2012

Johnny West · Joined: 03 May 2002 Posts: 1182

Roger,
NICE WORK! As always. Hope you make it to a few of the USSK races.
Ian, Roger is VERY GOOD on a CNC he does alot of custom work.
_________________
Johnny West/West Racing

Sam Zavaglia · Posted: Mon Dec 07, 2009 8:24 pm Post subject:

Hey Johnny,
What do you know about these 2 pictures that Roger's got out there? Looks intresting....... Wink

Nice work.

_________________
www.samzavaglia.com